conrods, conrod bearings, rod bolts
Product DescriptionPriceQtyBuy
Uni-Tech Performance Rods
Brand new chromoly forgings. Similar in appearance to a stock rod but this stronger chromoly forging is clearanced around the big end. I use them on 69mm to 78mm cranks where engine power doesn't exceed 150bhp. Above this level you should switch to the chromoly Super Rods. A very affordable superior quality rod. Supplied in balanced sets of 4.
Super Race Rods - 5.400" VW
4340 chromoly rods with ARP rod bolts. Stock length for VW journal cranks. I recommend these for any street engine making 130 to 200bhp, in preference to any modified stock rod. With an upgrade to stronger rod bolts, these rods are being used in race only turbo engines! Extremely good value for money and good insurance against rod failure in a fast street engine. The ideal companion to the forged stroker cranks featured at the top of the page.
Super Race Rods - 5.500" VW
As above but 5.500"
Super Race Rods - 5.500" Chevy Journal
As above but for the smaller diameter Chevy 2 inch journal crank. Please call if you need further advice on correct rod length and journal selection
ARP 2000 Rod Bolts - set of 8
Superior quality rod bolt replaces the standard ARP 8740 bolts suppled as standard with all JMR H-beam chromoly conrod sets. ARP 2000 Rod Bolts are a definite upgrade from 8740 Rod Bolts. ARP 2000 Rod Bolts are a superior choice for any person planning on pushing his/her car to its limits. Designed from an exclusive hybrid-alloy to assure superior strength and far better fatigue properties. Although 8740 and 2000's share some similiar qualities and characteristics, ARP 2000's are capable of clamp loads in the 215,000 to 220,000 psi range. In this strength level, stress corrosion and hydrogen embrittlement are typically not a problem, providing care and the proper torque is applied during assembly. Price is for a set of 8 bolts.
Conrod bearings - VW std
Std size bearings for use with crankshafts with VW journal.
Conrod bearings - VW 0.25mm
bearings for cranks with rod journals ground to first undersize - 0.25mm
Conrod bearings - VW 0.5mm
Bearings for cranks with rod journals ground to second undersize - 0.5mm
Conrod bearings - Chevy journal
Best quality Clevite 77 bearings for use with Chevy journal cranks

All prices are subject to VAT @ 15%
The amount will be automatically calculated at the checkout stage and displayed before you fill in the order form

If you need more info or the parts you're looking for aren't listed, please give us a call
01870 602519