ignition

ignition components

Product Description		Price	Qty	Buy
	MSD billet distributor MSD Billet distributors are the finest performance and racing distributors available. Every feature is designed to provide the best in performance and endurance to top off your ignition system. The MSD Billet Distributor has a high output magnetic pickup that will accurately trigger the ignition throughout any rpm. All of the MSD race technology is packed in including the sealed ball bearing, steel shaft and an easy-to-adjust mechanical advance assembly. It must be used with an MSD 6, 7, 8 or 10 Series Ignition. Supplied with custom aluminium distributor clamp and full instructions.
	MSD 6AL The MSD 6AL is a capacitive discharge, multiple sparking ignition. It will increase the overall performance of everything from the heavily loaded camper to the drag race street car. The hot multiple sparks ensure complete combustion of the air/fuel mixture even under the worst conditions possible.The 6AL is fitted with a built-in Soft Touch Rev Control. This feature allows you to set an rpm limit to protect the engine from over-rev damage caused by driveline failure or missed shifts. Other MSD RPM Controls can be connected to the 6AL such as a Three Step Module Selector or RPM Activated Switch. The 6AL also comes supplied with rubber shock mounts and 3,000, 6,000, 7,000 and 8,000 rpm modules.
	MSD Blaster 2 Ignition Coil If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6 or 7, the Blaster Coil line is the right choice. Special 100:1 windings are used to provide maximum build-up of voltage! These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. The Blaster Coil can be used with a stock ignition, Blaster Ignition, MSD 5, 6 or 7 Ignition Control.
	MSD Chrome Coil Bracket for Blaster 2 To mount your new Blaster Coil, MSD offers a chrome coil bracket.Mount to your fannshroud or firewall. Can also be mounted to the JMR custom coil mount (see below). It features a bolt and nut to secure the coil for a durable and good looking mount.
	MSD Super Conductor Ignition Leads 8.5mm MSD 8.5mm Super Conductor Spark Plug Wire have less than 50 ohms per foot of resistance for increased spark delivery. When this is combined with high EMI suppression capabilities, the strongest crimp connections, heavy duty boots and a high temp sleeve, the MSD 8.5mm SC just can�t be beat.
	009 distributor This is not a genuine Bosch unit. Recent Bosch price increases and lack of availability has prompted the introduction of copy 009 distributors. I've used this particular version on numerous engine builds with excellent results. They take the same points, cap and condensor as the original. Aftermarket ignition modules bolt right in. You must replace the stock vacuum advance distributor if making any carburetion improvements as you lose the vacuum take off or if there is a vac take off on your new carb, it won't send the right signal to the advance diaphragm. An ideal replacement for faulty distributors on stock engines too. Supplied complete with points, conensor and cap.
	Billet aluminium distributor clamp Replace your worn out, bent, distorted stock distributor clamp with this precision machined aluminium version.
	Distibutor cap for 009 Stock replacement cap for 009
	Rotor arm for 009 Stock replacement or Bosch 009 disrtributor
	Contact set - points for 009 Standard replacement part for Bosch 009 distributor
	Condensor for 009 Many people find it hard to get hold of a replacement condensor for their 009 distributor. This solves that problem.
	Compu-Fire ignition module. Replaces points in your 009 distributor. Easy to fit - just two wires, one to ach side of the coil. Once you've set the ignition timing, it can't alter.
	Econo Ignition Leads 7mm 7mm silicone leads. A budget performance upgrade if funds don't stretch to the 8mm Taylor leads. State choice of red or blue in 'comments' box on order form
	Stock VW distributor clamp This is a genuine VW part. Chrome aftermarket clamps aren't made correctly and prevent the distributor from seating fully in the crankcase.
	8mm Taylor Spiro Pro Ignition Leads - Red Resist temperatures up to 600 degrees F. Provide up to 10 times the conductivity of standard resistor wires without radio interference.
	8mm Taylor Spiro Pro Ignition Leads - Blue As above but in blue.
	NGK 12mm long reach plugs These hard to find NGK 12mm long reach plugs will suit the majority of street driven engines fitted with the latest version of CB Performance's 044 cylinder heads
	Spark Plugs - Bosch W8AC Standard plug for stock Type 1 heads. Also suitable for low compression engines using stock based heads. Price is per 1 set of 4 (four) plugs.
	Spark Plugs - Bosch W7AC One grade colder than the W8AC. Use in higher compression ratio engines using stock based heads where higher engine temperatures are expected. Price is per set of 4 (four).
	Spark plugs - Bosch W7DC Long reach plug. Fits early 044 cylinder heads and aftermarket Street Eliminators. Price is per set of 4 (four). The current 044 heads feature 12mm plug threads and will require the NGK plugs listed below